It is used for vertical conveying of the raw or final products. single-way model has one and double-way model has two elevator head. There are boots on for double elevators where there is only one outlet on the boot with single way elevators. It can be manufactured from...

It is used for horizontal or inclined conveying of the grain. Screw conveyors can have either collecting feature with its multiple inlets or distributor feature with its multiple outlets. Moreover, with pallet application, conveyors can also be used as a mixer. Screw...

It is used for transporting light particles, heavy particles, dry and floury products horizontally and inclined with certain angle. It can be used as a silo discharger under the silo and as a distributor conveyor at the multiple outlets. The whole body is manufactured...

It is used under silos and such like storage units to control the flow where vertical flow exists. The piston that is connected to the pneumatic group, provides flow or stops flow of the product by closing and opening the gate due to the signal.

Drawer sections with different volumes on the transfer drum, pour the granular product through downwards with control. Desired % capacity can be obtained by opening and closing the gates on the drawers. Through the transparent Plexiglas, rotation of the rotor and flow of the...

It is used for separating dust, offal etc. that is carried by the air on the cleaning section, from the air. Dust, offal etc. that is carried by the air enters the cyclone tangentially. Its velocity decreases with the extension of the section and the centrifugal momentum...

Pneumatic transfer is a system strongly preferred for multi transfer lines because of its neat structure and less requirement for maintenance. Cyclones which are calculated according to the project, separates the grain and the air.

Air locks let the grain pass but not air. Air locks that have been processed with high sensitivity and the cyclones that have been produced smoothly, guarantee the system to work with less energy and less maintenance.

It generates the air for pneumatic conveying of light material like dust, grain shell, etc. in the cleaning section, and pneumatic conveying of the grinded and sieved product in the milling section. It is manufactured as radial type. Construction :Its...

Electronic jet filters are used for filtering of the dusty air that is sucked from the cleaning machines or pneumatic conveying air in the milling section. It is applicable both with positive (exertion) and negative (vacuum) systems. There is a pressured air tank filled...

It is ideal for small requirements like transport systems and silo systems.

Makes cleaning with high pressure compressor. Difficulty of usage issues comes out in the applications where, high pressure ends up with humid causes problem. Numbers of filters can be ran with the air produced from one center, and that provides an advantage.

Its body is steel casting and there is a line connection at the bottom that comes from blower. Inner fan and outer body is processed sensitively and leakage is minimized. It is drived by a gear motor. Motor type and power is designated according to product to be carried. On the...

It is used to direct the product, which is conveyed by the pressured air from blower, to the intended bin. Directing drum is manufactured with accurate tolerance, thus maximum sealing is obtained. The direction of the conveyed product is changed by the drive of a pneumatic...

It is used to direct the product, which is conveyed by the pressured air from blower, to the intended bin. Directing drum is manufactured with accurate tolerance, thus maximum sealing is obtained. The direction of the conveyed product is changed by the drive of a pneumatic...

Two or more kinds of products which have been rated and classified are transferred to the exact point by the system. Various products are directed to the desired line by an adjustable mechanism thus specialties of the products can be changed.

It is used for mixing additional vitamin into the product for adjusting nutritional value of the product to optimum value. Thanks to special mixing and speed control units, desired ratio can be obtained easily.

It is used for obtaining single type of flour by mixing different type of flours homogeneously.

It is used to discharge product from silo by means of drum wings. The product that remains in it works as air lock. By means of its closed construction it Works without dust. There are wing drums at the both ends of the cylindrical body. This drum is drived by a gear...

It is used to convey product that is discharged from silo, within closed construction without any dust. Screw spindles have bearings at the both ends of the cylindrical shaped housing. Housing is also carrying the gear motor. Should the gear motor used with an inverter, it...

It is used to discharge product from bin by vibration of vibratory motor. Vibrating conical housing is mounted to upper housing with vibration absorbing rubber chocks and suspending bolts. Between the lower and upper housings special elastic coupling pieces are used. The...